| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| HDPE | HD5050EA | 4
(190°C/2.16 kg) | 950 | |  |  |  | HDPE grade for caps & closures, crates, pails, houseware |
| HDPE | HD5050UA | 4
(190°C/2.16 kg) | 950 | | | | | Dustbins, pallets, crates, |
| HDPE | HD5130EA | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps & closures, bins |
| HDPE | HD5211EA | 11
(190°C/2.16 kg) | 951 | | | | | Pails, houseware, cartridges, toys, caps & closures, over caps |
| HDPE | HD5218EA | 18
(190°C/2.16 kg) | 952 | | | | | Caps & Closures, Aerosol caps, pails, houseware |
| HDPE | HD5226EA | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-E | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD6070EA | 7.6
(190°C/2.16 kg) | 960 | | | | | Caps & Closures, Over caps, Cartridges, crates, pallets, pails |
| HDPE | HD6070UA | 7.6
(190°C/2.16 kg) | 960 | | | | | Crates, pallets, pails, seats |
| HPP | 100-CA50 | 50
(230°C/2.16 kg) | | 1550 | | | | Thin walled containers for dairy and fresh food, media packaging |
| HPP | 100-CB25 | 25
(230°C/2.16 kg) | | 1500 | | | | Media packaging, technical moulding, fast cycling |
| HPP | 100-GA02 | 2
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes. |
| HPP | 100-GA03 | 3
(230°C/2.16 kg) | | 1450 | | | | Trays and containers for food products, tapes. Good rigidity, high heat resistance |
| HPP | 100-GA04 | 4
(230°C/2.16 kg) | | 1400 | | | | Trays and containers for food products, tapes. Good rigidity, high heat resistance |
| HPP | 100-GA09 | 9
(230°C/2.16 kg) | | 1500 | | | | General purpose injection moulding, standard cast film |
| HPP | 100-GA12 | 12
(230°C/2.16 kg) | | 1400 | | | | Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. |
| HPP | 100-GB06 | 6
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers. Good rigidity, high heat resistance |
| HPP | 100-GB25 | 25
(230°C/2.16 kg) | | 1200 | | | | Thin wall parts, garden furniture |
| HPP | 100-HR25 | 25
(230°C/2.16 kg) | | 1800 | | | | High stiffness for appliances, technical moulding and food packaging |
| HPP | 101-CA06 | 6
(230°C/2.16 kg) | | 1750 | | | | Trays and containers for food products. Good rigidity, high heat resistance, good transparency |
| HPP | 101-SA09 | 9
(230°C/2.16 kg) | | 1500 | | | | Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent |
| HPP | 194-NA25 | 25
(230°C/2.16 kg) | | 1750 | | | | Transparent containers |
| HPP | HCS580 | 5
(230°C/2.16 kg) | | 2200 | | | | Trays and containers for food products. Very high rigidity, very high heat resistance |
| HPP | HCW280 | 20
(230°C/2.16 kg) | | 2200 | | | | Ultra high stiffness for appliances, technical moulding and food packaging |
| ICP | 300-CA06 | 6
(230°C/2.16 kg) | | 1500 | | | | Toys, housewares, pails, appliances |
| ICP | 400-CA16 | 16
(230°C/2.16 kg) | | 1600 | | | | |
| ICP | 400-CA70 | 70
(230°C/2.16 kg) | | 1150 | | | | ICP for yellow fat containers, housewares, thin wall packaging, Caps & closures |
| ICP | 400-CB08 | 8
(230°C/2.16 kg) | | 1200 | | | | Crates, trays and large pails, batteries |
| ICP | 400-GA03 | 2.5
(230°C/2.16 kg) | | 1250 | | | | Impact copolymer for sheets, trays, containers, artificial grass, stationery/confectionery films. Good heat resistance, very high impact. |
| ICP | 400-GA05 | 5
(230°C/2.16 kg) | | 1200 | | | | Impact copolymer for stationery/confectionery films, sheets, trays, containers. Good heat resistance, very high impact |
| ICP | 400-NA01 | 1.5
(230°C/2.16 kg) | | 1300 | | | | Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact |
| ICP | 401-CA55 | 55
(230°C/2.16 kg) | | 1100 | | | | |
| ICP | 401-CB50 | 50
(230°C/2.16 kg) | | 1300 | | | | ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares |
| ICP | 401-NA06 | 6
(230°C/2.16 kg) | | 1200 | | | | Impact copolymer nucleated for stationery films, sheets, trays, containers. Good heat resistance, very high impact |
| ICP | 402-CB12 | 12
(230°C/2.16 kg) | | 1350 | | | | ICP for pails, containers, crates, housewares, toys |
| ICP | 450-HP60 | 60
(230°C/2.16 kg) | | 1400 | | | | |
| ICP | 450-HP90 | 90
(230°C/2.16 kg) | | 1350 | | | | |
| ICP | 451-HP40 | 40
(230°C/2.16 kg) | | 1350 | | | | ICP for housewares, pails, boxes |
| ICP | 500-GA20 | 20
(230°C/2.16 kg) | | 850 | | | | Toys, containers, car batteries, luggage - ultra high impact, improved stiffness |
| ICP | 500-NA20 | 20
(230°C/2.16 kg) | | 1100 | | | | Pails, containers, crates, housewares, toys |
| ICP | CAP906 | 6
(230°C/2.16 kg) | | 1500 | | | | ICP for caps and closures for the packaging of carbonated soft drinks |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| RCP | 200-CA13 | 13
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent packaging, Caps & closures, housewares |
| RCP | 200-CA25 | 25
(230°C/2.16 kg) | | 1000 | | | | RCP for transparent thin wall packaging, housewares, clarified food containers - improved organoleptics |
| RCP | 200-CA40 | 40
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent thin wall packaging, Caps & closures, housewares, clarified food containers - improved organoleptics |
| RCP | 200-CA45 | 45
(230°C/2.16 kg) | | 1050 | | | | Transparent thin wall packaging, Caps & closures, housewares, clarified food containers - improved organoleptics |
| RCP | 201-CA25 | 25
(230°C/2.16 kg) | | 1000 | | | | RCP for transparent thin wall packaging, housewares, clarified food containers - improved organoleptics |
| RCP | 222-CC50 | 50
(230°C/2.16 kg) | | 1100 | | | | Transparent durable articles, housewares and appliances, fast cycling |
| RCP | 240-CA12 | 13
(230°C/2.16 kg) | | 850 | | | | RCP for transparent packaging requiring excellent impact |
| mLLDPE | PF1315AA | 15
(190°C/2.16 kg) | 914 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |
| mLLDPE | PF1320AA | 20
(190°C/2.16 kg) | 913 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |