| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| Compound | HEY500 | 25
(230°C/2.16 kg) | 910 | |  |  | | |
| HDPE | B2020LG/34 | 1.8
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | B4020LG/35 | 1.8
(190°C/2.16 kg) | 960 | | | | | HDPE resin used for high-speed blow moulding of bottles, 1% titanium dioxide. |
| HDPE | B4020LGN1963 | 1.8
(190°C/2.16 kg) | 952 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization). |
| HDPE | B4020N1331 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, slip agent free |
| HDPE | B4020N1332 | 1.9
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing slip agent |
| HDPE | B4020N1343 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, containing slip agent |
| HDPE | B4020N2040 | 1.9
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing low level of slip agent |
| HDPE | B4020N2043 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing low level of slip agent |
| HDPE | CAP602 | 0.8
(190°C/2.16 kg) | 953 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; very high ESCR, slip agent free |
| HDPE | CAP602S2 | 0.8
(190°C/2.16 kg) | 953 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; very high ESCR, containing slip agent |
| HDPE | HD5050EA | 4
(190°C/2.16 kg) | 950 | | | |  | HDPE grade for caps & closures, crates, pails, houseware |
| HDPE | HD5130EA | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps & closures, bins |
| HDPE | HD5130EA-B | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, slip agent free |
| HDPE | HD5211EA | 11
(190°C/2.16 kg) | 951 | | | | | Pails, houseware, cartridges, toys, caps & closures, over caps |
| HDPE | HD5211EA-B | 11
(190°C/2.16 kg) | 951 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, aromatized water and juices ; easy processing, slip agent free |
| HDPE | HD5211GA-B | 11
(190°C/2.16 kg) | 951 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, aromatized water and juices ; easy processing, containing slip agent |
| HDPE | HD5218EA | 18
(190°C/2.16 kg) | 952 | | | | | Caps & Closures, Aerosol caps, pails, houseware |
| HDPE | HD5226EA | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-E | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-M | 26
(190°C/2.16 kg) | 953 | | | | | HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and Caps & Closures intended for the primary packaging of medical and pharmaceutical applications |
| HDPE | HD5240EA-B | 4
(190°C/2.16 kg) | 950 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, functionalized beverages, slightly carbonated or pressurized beverages ; good ESCR, easy processing, slip agent free |
| HDPE | HD5240GA-B | 4
(190°C/2.16 kg) | 950 | | | | | HDPE grade for caps and closures with direct beverage contact for juices, functionalized beverages, slightly carbonated or pressurized beverages ; good ESCR, easy processing, containing slip agent |
| HDPE | HD6007S | 0.6
(190°C/2.16 kg) | 962 | | | | | High rigitity polyethylene grade for fresh milk and non-aggressive chemicals |
| HDPE | HD6070EA | 7.6
(190°C/2.16 kg) | 960 | | | | | Caps & Closures, Over caps, Cartridges, crates, pallets, pails |
| HDPE | HD6070EA-B | 7.6
(190°C/2.16 kg) | 960 | | | | | HDPE grade for caps anc closures with direct beverage contact for still mineral water, aromatized water and juices; easy processing, slip agent free |
| HDPE | HD6070FA | 7.6
(190°C/2.16 kg) | 960 | | | | | High density homopolymer with a very low gel level. Used in blends for food packaging to increase water vapour barrier properties, temperature, oil and fat resistance. When used in blends provides increased stiffness, higher gloss and reduced tendency to |
| HDPE | LGB163N2045 | 0.4
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | LGB263N2070 | 0.7
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | MMPE0950/30 | | | | | | | Anti-acid used for 6-layers bottle |
| HDPE | MMPE3940/10 | | | | | | | Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle. |
| HEAT SEAL | KS357 | 5
(230°C/2.16 kg) | | 620 | | | | BOPP Film 105°C SIT terpolymer for metallisable film |
| HPP | 100-CA50 | 50
(230°C/2.16 kg) | | 1550 | | | | Thin walled containers for dairy and fresh food, media packaging |
| HPP | 100-GA02 | 2
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes. |
| HPP | 100-GA04 | 4
(230°C/2.16 kg) | | 1400 | | | | Trays and containers for food products, tapes. Good rigidity, high heat resistance |
| HPP | 100-GA09 | 9
(230°C/2.16 kg) | | 1500 | | | | General purpose injection moulding, standard cast film |
| HPP | 100-GA12 | 12
(230°C/2.16 kg) | | 1400 | | | | Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. |
| HPP | 100-GA35 | 35
(230°C/2.16 kg) | | 1350 | | | | Injection moulding master-batches & compounds applications |
| HPP | 100-GB06 | 6
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers. Good rigidity, high heat resistance |
| HPP | 100-GB25 | 25
(230°C/2.16 kg) | | 1200 | | | | Thin wall parts, garden furniture |
| HPP | 100-HR25 | 25
(230°C/2.16 kg) | | 1800 | | | | High stiffness for appliances, technical moulding and food packaging |
| HPP | 100-MG03 | 3
(230°C/2.16 kg) | | 1450 | | | | PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications |
| HPP | 100-MG12 | 12
(230°C/2.16 kg) | | 1400 | | | | PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications |
| HPP | 100-MG25 | 25
(230°C/2.16 kg) | | 1200 | | | | PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications
|
| HPP | 101-SA09 | 9
(230°C/2.16 kg) | | 1500 | | | | Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent |
| ICP | 400-CA70 | 70
(230°C/2.16 kg) | | 1150 | | | | ICP for yellow fat containers, housewares, thin wall packaging, Caps & closures |
| ICP | 401-CB50 | 50
(230°C/2.16 kg) | | 1300 | | | | ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares |
| ICP | 402-CB12 | 12
(230°C/2.16 kg) | | 1350 | | | | ICP for pails, containers, crates, housewares, toys |
| ICP | 451-HP40 | 40
(230°C/2.16 kg) | | 1350 | | | | ICP for housewares, pails, boxes |
| ICP | CAP906 | 6
(230°C/2.16 kg) | | 1500 | | | | ICP for caps and closures for the packaging of carbonated soft drinks |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 19N430B | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE grade for general coating applications with improved heat sealability |
| LDPE | 19N930 | 7
(190°C/2.16 kg) | 920 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| LDPE | 23L430B | 4.5
(190°C/2.16 kg) | 923 | | | | | LDPE grade for general coating applications |
| LDPE | 23T930 | 22
(190°C/2.16 kg) | 923 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | M21N430 | 7.5
(190°C/2.16 kg) | 922 | | | | | Acid copolymer with 1.2 % MAA to achieve a better adhesion to various substrates, particularly aluminium foil or metallized BOPP |
| LDPE | M23N430 | 7.5
(190°C/2.16 kg) | 923 | | | | | Speciality extrusion coating resin with improved adhesion characteristics |
| LDPE | PH22D630 | 0.3
(190°C/2.16 kg) | 922 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications |
| LDPE | PH23H630 | 2
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH23T630 | 22
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH27D630 | 0.3
(190°C/2.16 kg) | 927 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH30D630 | 0.3
(190°C/2.16 kg) | 930 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. |
| LLDPE | LL2640AC | 4.1
(190°C/2.16 kg) | 930 | | | | | Grade with great sealing properties and good puncture resistance used in paper coating and in the hygienic market. Used either in co-extrusion or in blends with LDPE. Cast stretchwrap; anticling layer; bubble film. |
| RCP | 200-CA13 | 13
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent packaging, Caps & closures, housewares |
| RCP | 200-CA25 | 25
(230°C/2.16 kg) | | 1000 | | | | RCP for transparent thin wall packaging, housewares, clarified food containers - improved organoleptics |
| RCP | 200-CA40 | 40
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent thin wall packaging, Caps & closures, housewares, clarified food containers - improved organoleptics |
| RCP | 200-MG02 | 1.8
(230°C/2.16 kg) | | 900 | | | | Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C |
| RCP | 200-MS25 | 25
(230°C/2.16 kg) | | 950 | | | | Highly clarified and highly lubricated random copolymer with a high ethylene content and good flow primarily intended for injection moulding |
| RCP | 240-CA12 | 13
(230°C/2.16 kg) | | 850 | | | | RCP for transparent packaging requiring excellent impact |
| RCP | CAP912 | 13
(230°C/2.16 kg) | | 1000 | | | | RCP for caps and closures for the packaging of still mineral water, juices and functionnalized drinks |
| mLLDPE | PF1315AA | 15
(190°C/2.16 kg) | 914 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |
| mLLDPE | PF1320AA | 20
(190°C/2.16 kg) | 913 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |