| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| EBA | B24D230 | 0.35
(190°C/2.16 kg) | 924 | |  |  |  | Jacketing
EBA (8% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| EBA | B28N230 | 8
(190°C/2.16 kg) | 924 | | | | | Jacketing
EBA (15% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| HDPE | A4040 | 3.5
(190°C/2.16 kg) | 944 | | | | | Base resin for crosslinkable PEX b pipes |
| HDPE | B4922/20 | 0.5
(190°C/5 kg) | 958 | | | | | Yellow stripe for TUB121, gas |
| HDPE | B4922/20N3000 | 0.3
(190°C/5 kg) | 958 | | | | | Yellow stripe for TUB121N3000, gas |
| HDPE | B4922/40N2025 | 0.3
(190°C/5 kg) | 952 | | | | | Blue stripe for TUB121N2025, water |
| HDPE | B4922/40N3000 | 0.3
(190°C/5 kg) | 952 | | | | | Blue stripe for TUB121N3000, water |
| HDPE | B4922/50N3000 | 0.3
(190°C/5 kg) | 959 | | | | | Orange stripe for TUB121N3000, gas |
| HDPE | B4922/90N3000 | 0.3
(190°C/5 kg) | 957 | | | | | Brown stripe for TUB121N3000, sewage |
| HDPE | B6921/20N2010 | 0.45
(190°C/5 kg) | 953 | | | | | Yellow stripe for TUB131N2010, gas |
| HDPE | B6921/40N2010 | 0.45
(190°C/5 kg) | 948 | | | | | BLue stripe for TUB131N2010, water |
| HDPE | HD3850UA | 4.5
(190°C/2.16 kg) | 938 | | | | | Rotomoulding application; Water tanks, Chemical tanks, Agricultural, Play ground, Recycling banks |
| HDPE | HD3930UA | 3.0
(190°C/2.16 kg) | 939 | | | | | Rotomoulding application; various tank applications |
| HDPE | HD4330UA | 3.0
(190°C/2.16 kg) | 943 | | | | | Rotomoulding applications : Fuel tanks, Kayak, Manhole inspection draining tank, Underground parts |
| HDPE | K38-20 | 0.85
(190°C/5 kg) | 938 | | | | | Natural grade; Non pressure pipes, conduits, ducting.
It is also suitable for blown film extrusion. |
| HDPE | K38-20/20 | 0.9
(190°C/5 kg) | 949 | | | | | Yellow stripe for TUB171 and PC002-50R102, gas |
| HDPE | K38-20/40 | 0.9
(190°C/5 kg) | 943.5 | | | | | Blue stripe for TUB171 and PC002-50R102, water |
| HDPE | K46-06-185 | 4.2
(190°C/21.6 kg) | 946 | | | | | All types of automotive fuel tanks |
| HDPE | LRB711 | 1.5
(190°C/21.6 kg) | 995 | | | | | Filler pipes and other parts requiring conductive properties |
| HDPE | PC002-50R968 | 0.85
(190°C/5 kg) | 943 | | | | | PE80; Pressure pipes for drinking water transport |
| HDPE | RSB714N0060 | 4
(190°C/21.6 kg) | 946 | | | | | Automotive fuel tanks fluorinated in-line |
| HDPE | TUB121 | 0.45
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport |
| HDPE | TUB121N2025 | 0.3
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport |
| HDPE | TUB121N3000 | 0.3
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport, very large diameter pipes |
| HDPE | TUB123 | 0.48
(190°C/5 kg) | 980 | | | | | White compound for pipe coating |
| HDPE | TUB124 | 0.48
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB124N2025 | 0.32
(190°C/5 kg) | 953 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB124N6000 | 0.3
(190°C/5 kg) | 953 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB125N2025 | 0.3
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for gas transport |
| HDPE | TUB125N6000 | 0.3
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for gas transport |
| HDPE | TUB131N2010 | 0.46
(190°C/5 kg) | 954 | | | | | PE80; Pressure pipes for gas and drinking water transport |
| HDPE | TUB171 | 0.85
(190°C/5 kg) | 949 | | | | | PE80; Pressure pipes for gas and drinking water transport |
| HDPE | TUB172 | 0.85
(190°C/5 kg) | 938 | | | | | PE80; Pressure pipes for gas transport |
| ICP | 350-HM00 | 0.3
(230°C/2.16 kg) | | 1850 | | | | Impact copolymer for non pressure pipes, blow-moulding and sheet extrusion applications |
| ICP | 433-NA00 | 0.3
(230°C/2.16 kg) | | 1500 | | | | Sheets; non pressure pipes; good heat resistance, very high impact |
| ICP | RF110 | 0.8
(230°C/2.16 kg) | | 1300 | | | | Synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films. Good heat resistance, very high impact |
| LDPE | BP28D780 | 0.25
(190°C/2.16 kg) | 929 | | | | | Telecom insulation
LDPE insulation with high extrusion performance |
| LDPE | BPD2000 | 2
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2000E | 2
(190°C/2.16 kg) | 923 | | | | | Power medium & high voltage insulation and applications requesting extra cleanliness
Unstabilised very clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2070 | 0.28
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for silane crosslinking (Monosil®) |
| LDPE | BPD2142 | 1
(190°C/2.16 kg) | 930 | | | | | Power low voltage cable insulation
Unstabilised LDPE (Monosil®, Sioplas®) |
| LDPE | BPD2167 | 0.3
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised LDPE for overhead cables application (Monosil®) |
| LDPE | BPD8063 | 1.5
(190°C/2.16 kg) | 923 | | | | | Telecom insulation
LDPE for low loss RF cable insulation |
| LDPE | BPD8128 | 0.27
(190°C/2.16 kg) | 923 | | | | | Power low voltage cable insulation
Stabilised LDPE for copper conductor (Monosil ®) |
| LLDPE | BPD3042 | 4.1
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised LLDPE for standard LV applications of for overhead cable application (Monosil®). |
| LLDPE | BPD3052 | 4.1
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised high performance LLDPE for LV applicaitons (Monosil® & Sioplas®) |
| LLDPE | BPD3220 | 2.4
(190°C/2.16 kg) | 920 | | | | | Power low voltage insulation
Unstabilised LLDPE for standard LV applications (Monosil®) |
| LLDPE | BPD3642 | 3
(190°C/2.16 kg) | 920 | | | | | Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications |
| LLDPE | BPD3669 | 3.3
(190°C/2.16 kg) | 926 | | | | | Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications. |
| MDPE | BPD4020 | 0.2
(190°C/2.16 kg) | 938 | | | | | Jacketing
Stabilised MDPE jacket |
| MDPE | BPD4035 | 0.2
(190°C/2.16 kg) | 949 | | | | | Jacketing
MDPE black jacket compound |