| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| EBA | B24D230 | 0.35
(190°C/2.16 kg) | 924 | |  |  |  | Jacketing
EBA (8% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| EBA | B24D760 | 0.3
(190°C/2.16 kg) | 924 | | | | | EBA copolymer for elastic packaging film |
| EBA | B28N230 | 8
(190°C/2.16 kg) | 924 | | | | | Jacketing
EBA (15% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| HDPE | A2010PWC | 0.5
(190°C/2.16 kg) | 959 | | | | | Raw material for Wood Plastic Composites |
| HDPE | A3180PN1852 | 21.5
(190°C/2.16 kg) | 957 | | | | | Carrier for color concentrates, master-batches, textile coating |
| HDPE | A4009MFN1325 | 0.9
(190°C/2.16 kg) | 960 | | | | | Monofilaments (fishing nets, protective nets for construction, agriculture protective nets, ...) |
| HDPE | A4009PFN1324 | 0.85
(190°C/2.16 kg) | 959 | | | | | Chlorinated HDPE powder.
Carrier for color concentrates, master-batches and wood plastic composites. |
| HDPE | A4040 | 3.5
(190°C/2.16 kg) | 944 | | | | | Base resin for crosslinkable PEX b pipes |
| HDPE | A4040P | 3.5
(190°C/2.16 kg) | 943.5 | | | | | Carrier for color concentrates, master-batches and XLPE |
| HDPE | A4090P | 11
(190°C/2.16 kg) | 951 | | | | | Carrier for color concentrates, master-batches |
| HDPE | A5006FN0095 | 1.9
(190°C/5 kg) | 945 | | | | | Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...) |
| HDPE | A5006FN1280 | 1.9
(190°C/5 kg) | 944 | | | | | Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...) |
| HDPE | A5006FN1285 | 1.6
(190°C/5 kg) | 944 | | | | | Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...) |
| HDPE | A5006PFN1281 | 0.6
(190°C/2.16 kg) | 943.5 | | | | | Carrier for color concentrates, master-batches |
| HDPE | B2020LG/34 | 1.8
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | B2020P | 1.7
(190°C/2.16 kg) | 956 | | | | | Carrier for color concentrates, master-batches |
| HDPE | B4020LG/35 | 1.8
(190°C/2.16 kg) | 960 | | | | | HDPE resin used for high-speed blow moulding of bottles, 1% titanium dioxide. |
| HDPE | B4020LGN1963 | 1.8
(190°C/2.16 kg) | 952 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization). |
| HDPE | B4020N1331 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, slip agent free |
| HDPE | B4020N1332 | 1.9
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing slip agent |
| HDPE | B4020N1343 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, containing slip agent |
| HDPE | B4020N2040 | 1.9
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing low level of slip agent |
| HDPE | B4020N2043 | 2.2
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; high ESCR, containing low level of slip agent |
| HDPE | B4020P | 1.75
(190°C/2.16 kg) | 951.5 | | | | | Carrier for color concentrates, master-batches |
| HDPE | B4922/20 | 0.5
(190°C/5 kg) | 958 | | | | | Yellow stripe for TUB121, gas |
| HDPE | B4922/20N3000 | 0.3
(190°C/5 kg) | 958 | | | | | Yellow stripe for TUB121N3000, gas |
| HDPE | B4922/40N2025 | 0.3
(190°C/5 kg) | 952 | | | | | Blue stripe for TUB121N2025, water |
| HDPE | B4922/40N3000 | 0.3
(190°C/5 kg) | 952 | | | | | Blue stripe for TUB121N3000, water |
| HDPE | B4922/50N3000 | 0.3
(190°C/5 kg) | 959 | | | | | Orange stripe for TUB121N3000, gas |
| HDPE | B4922/90N3000 | 0.3
(190°C/5 kg) | 957 | | | | | Brown stripe for TUB121N3000, sewage |
| HDPE | B6921/20N2010 | 0.45
(190°C/5 kg) | 953 | | | | | Yellow stripe for TUB131N2010, gas |
| HDPE | B6921/40N2010 | 0.45
(190°C/5 kg) | 948 | | | | | BLue stripe for TUB131N2010, water |
| HDPE | CAP602 | 0.8
(190°C/2.16 kg) | 953 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; very high ESCR, slip agent free |
| HDPE | CAP602S2 | 0.8
(190°C/2.16 kg) | 953 | | | | | HDPE grade for caps and closures with direct beverage contact for carbonated soft drinks; very high ESCR, containing slip agent |
| HDPE | HD3850UA | 4.5
(190°C/2.16 kg) | 938 | | | | | Rotomoulding application; Water tanks, Chemical tanks, Agricultural, Play ground, Recycling banks |
| HDPE | HD3930UA | 3.0
(190°C/2.16 kg) | 939 | | | | | Rotomoulding application; various tank applications |
| HDPE | HD4330UA | 3.0
(190°C/2.16 kg) | 943 | | | | | Rotomoulding applications : Fuel tanks, Kayak, Manhole inspection draining tank, Underground parts |
| HDPE | HD4820EA | 2.5
(190°C/2.16 kg) | 950 | | | | | Specially formulated grade for exceptional levels of gloss |
| HDPE | HD5050EA | 4
(190°C/2.16 kg) | 950 | | | | | HDPE grade for caps & closures, crates, pails, houseware |
| HDPE | HD5050UA | 4
(190°C/2.16 kg) | 950 | | | | | Dustbins, pallets, crates, |
| HDPE | HD5130EA | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps & closures, bins |
| HDPE | HD5130EA-B | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, slip agent free |
| HDPE | HD5211EA | 11
(190°C/2.16 kg) | 951 | | | | | Pails, houseware, cartridges, toys, caps & closures, over caps |
| HDPE | HD5211EA-B | 11
(190°C/2.16 kg) | 951 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, aromatized water and juices ; easy processing, slip agent free |
| HDPE | HD5211EA-Y | 11
(190°C/2.16 kg) | 951 | | | | | Continuous or staple fibres ; non-woven (mainly medical & hygienic use) |
| HDPE | HD5211GA-B | 11
(190°C/2.16 kg) | 951 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, aromatized water and juices ; easy processing, containing slip agent |
| HDPE | HD5218EA | 18
(190°C/2.16 kg) | 952 | | | | | Caps & Closures, Aerosol caps, pails, houseware |
| HDPE | HD5218EA-Y | 18
(190°C/2.16 kg) | 952 | | | | | Continuous or staple fibres ; non-woven (mainly medical & hygienic use) |
| HDPE | HD5226EA | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-E | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-M | 26
(190°C/2.16 kg) | 953 | | | | | HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and Caps & Closures intended for the primary packaging of medical and pharmaceutical applications |
| HDPE | HD5226EA-Y | 26
(190°C/2.16 kg) | 953 | | | | | Continuous or staple fibres ; non-woven (mainly medical & hygienic use) |
| HDPE | HD5240EA-B | 4
(190°C/2.16 kg) | 950 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, functionalized beverages, slightly carbonated or pressurized beverages ; good ESCR, easy processing, slip agent free |
| HDPE | HD5240GA-B | 4
(190°C/2.16 kg) | 950 | | | | | HDPE grade for caps and closures with direct beverage contact for juices, functionalized beverages, slightly carbonated or pressurized beverages ; good ESCR, easy processing, containing slip agent |
| HDPE | HD5410EA-Y | 1.0
(190°C/2.16 kg) | 954 | | | | | Monofilaments (fishing nets, protective nets for construction, agriculture protective nets,...) |
| HDPE | HD5502S | 0.2
(190°C/2.16 kg) | 954 | | | | | General purpose grade with exceptional levels of impact performance |
| HDPE | HD6007S | 0.6
(190°C/2.16 kg) | 962 | | | | | High rigitity polyethylene grade for fresh milk and non-aggressive chemicals |
| HDPE | HD6070EA | 7.6
(190°C/2.16 kg) | 960 | | | | | Caps & Closures, Over caps, Cartridges, crates, pallets, pails |
| HDPE | HD6070EA-B | 7.6
(190°C/2.16 kg) | 960 | | | | | HDPE grade for caps anc closures with direct beverage contact for still mineral water, aromatized water and juices; easy processing, slip agent free |
| HDPE | HD6070FA | 7.6
(190°C/2.16 kg) | 960 | | | | | High density homopolymer with a very low gel level. Used in blends for food packaging to increase water vapour barrier properties, temperature, oil and fat resistance. When used in blends provides increased stiffness, higher gloss and reduced tendency to |
| HDPE | HD6070UA | 7.6
(190°C/2.16 kg) | 960 | | | | | Crates, pallets, pails, seats |
| HDPE | HM4560UA | 6
(190°C/21.6 kg) | 949 | | | | | Exceptional levels of impact and environmental stress crack resistance + UV stability ideal for IBC and large tank production |
| HDPE | HM5060XA | 6
(190°C/21.6 kg) | 950 | | | | | Very high levels of impact and environmental stress crack resistance specifically tailored for 25L container production |
| HDPE | HM5411EA | 10
(190°C/21.6 kg) | 952 | | | | | General purpose grade with high impact and environmental stress crack resistance ideal for 1-25L containers |
| HDPE | K38-20 | 0.85
(190°C/5 kg) | 938 | | | | | Natural grade; Non pressure pipes, conduits, ducting.
It is also suitable for blown film extrusion. |
| HDPE | K38-20/20 | 0.9
(190°C/5 kg) | 949 | | | | | Yellow stripe for TUB171 and PC002-50R102, gas |
| HDPE | K38-20/40 | 0.9
(190°C/5 kg) | 943.5 | | | | | Blue stripe for TUB171 and PC002-50R102, water |
| HDPE | K46-06-185 | 4.2
(190°C/21.6 kg) | 946 | | | | | All types of automotive fuel tanks |
| HDPE | LGB163N2045 | 0.4
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | LGB263N2070 | 0.7
(190°C/2.16 kg) | 1000 | | | | | HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk. |
| HDPE | LRB711 | 1.5
(190°C/21.6 kg) | 995 | | | | | Filler pipes and other parts requiring conductive properties |
| HDPE | MMPE0950/30 | | | | | | | Anti-acid used for 6-layers bottle |
| HDPE | MMPE3940/10 | | | | | | | Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle. |
| HDPE | PC002-50R968 | 0.85
(190°C/5 kg) | 943 | | | | | PE80; Pressure pipes for drinking water transport |
| HDPE | RSB714N0060 | 4
(190°C/21.6 kg) | 946 | | | | | Automotive fuel tanks fluorinated in-line |
| HDPE | TUB121 | 0.45
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport |
| HDPE | TUB121N2025 | 0.3
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport |
| HDPE | TUB121N3000 | 0.3
(190°C/5 kg) | 959 | | | | | PE100; Pressure pipes for gas and drinking water transport, very large diameter pipes |
| HDPE | TUB123 | 0.48
(190°C/5 kg) | 980 | | | | | White compound for pipe coating |
| HDPE | TUB124 | 0.48
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB124N2025 | 0.32
(190°C/5 kg) | 953 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB124N6000 | 0.3
(190°C/5 kg) | 953 | | | | | PE100; Pressure pipes for drinking water transport |
| HDPE | TUB125N2025 | 0.3
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for gas transport |
| HDPE | TUB125N6000 | 0.3
(190°C/5 kg) | 952 | | | | | PE100; Pressure pipes for gas transport |
| HDPE | TUB131N2010 | 0.46
(190°C/5 kg) | 954 | | | | | PE80; Pressure pipes for gas and drinking water transport |
| HDPE | TUB171 | 0.85
(190°C/5 kg) | 949 | | | | | PE80; Pressure pipes for gas and drinking water transport |
| HDPE | TUB172 | 0.85
(190°C/5 kg) | 938 | | | | | PE80; Pressure pipes for gas transport |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 19N430B | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE grade for general coating applications with improved heat sealability |
| LDPE | 19N930 | 7
(190°C/2.16 kg) | 920 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 21D430 | 0.25
(190°C/2.16 kg) | 923 | | | | | Heavy duty film; shrinkhoods |
| LDPE | 21F430 | 0.8
(190°C/2.16 kg) | 923 | | | | | General purpose film and bags |
| LDPE | 21F564 | 0.8
(190°C/2.16 kg) | 923 | | | | | General purpose; carrier bags |
| LDPE | 21H460 | 1.5
(190°C/2.16 kg) | 922 | | | | | General purpose; shrink; foam |
| LDPE | 22D730 | 0.3
(190°C/2.16 kg) | 922 | | | | | Blown film for extra strong bags and shrink film |
| LDPE | 22E740 | 0.5
(190°C/2.16 kg) | 922 | | | | | Blown film for extra strong bags and shrink film |
| LDPE | 22G564 | 1.2
(190°C/2.16 kg) | 922 | | | | | Blown film for carrier bags |
| LDPE | 22G764 | 1.2
(190°C/2.16 kg) | 922 | | | | | Blown film for strong bags and shrink film |
| LDPE | 22H594 | 2.1
(190°C/2.16 kg) | 922 | | | | | |
| LDPE | 22H760 | 2.1
(190°C/2.16 kg) | 922 | | | | | Blown film for packaging |
| LDPE | 23H430 | 2
(190°C/2.16 kg) | 923 | | | | | General purpose; shrink; foam |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| LDPE | 23L430B | 4.5
(190°C/2.16 kg) | 923 | | | | | LDPE grade for general coating applications |
| LDPE | 23T930 | 22
(190°C/2.16 kg) | 923 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 24F564 | 0.75
(190°C/2.16 kg) | 924 | | | | | Blown film for lamination |
| LDPE | 24F760 | 0.75
(190°C/2.16 kg) | 924 | | | | | Blown film for lamination |
| LDPE | 28H430 | 2.1
(190°C/2.16 kg) | 930.5 | | | | | Nappy film; hygienic; cast |
| LDPE | BP28D780 | 0.25
(190°C/2.16 kg) | 929 | | | | | Telecom insulation
LDPE insulation with high extrusion performance |
| LDPE | BPD2000 | 2
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2000E | 2
(190°C/2.16 kg) | 923 | | | | | Power medium & high voltage insulation and applications requesting extra cleanliness
Unstabilised very clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2070 | 0.28
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for silane crosslinking (Monosil®) |
| LDPE | BPD2142 | 1
(190°C/2.16 kg) | 930 | | | | | Power low voltage cable insulation
Unstabilised LDPE (Monosil®, Sioplas®) |
| LDPE | BPD2167 | 0.3
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised LDPE for overhead cables application (Monosil®) |
| LDPE | BPD8063 | 1.5
(190°C/2.16 kg) | 923 | | | | | Telecom insulation
LDPE for low loss RF cable insulation |
| LDPE | BPD8128 | 0.27
(190°C/2.16 kg) | 923 | | | | | Power low voltage cable insulation
Stabilised LDPE for copper conductor (Monosil ®) |
| LDPE | M21E760 | 0.5
(190°C/2.16 kg) | 933 | | | | | Easy-tear applications |
| LDPE | M21G764 | 0.95
(190°C/2.16 kg) | 926 | | | | | FFS thin bags; blending |
| LDPE | M21G864 | 0.95
(190°C/2.16 kg) | 926 | | | | | Deep freeze, FFS thin bags |
| LDPE | M21N430 | 7.5
(190°C/2.16 kg) | 922 | | | | | Acid copolymer with 1.2 % MAA to achieve a better adhesion to various substrates, particularly aluminium foil or metallized BOPP |
| LDPE | M23N430 | 7.5
(190°C/2.16 kg) | 923 | | | | | Speciality extrusion coating resin with improved adhesion characteristics |
| LDPE | PH22D630 | 0.3
(190°C/2.16 kg) | 922 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications |
| LDPE | PH23H630 | 2
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH23T630 | 22
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH27D630 | 0.3
(190°C/2.16 kg) | 927 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH30D630 | 0.3
(190°C/2.16 kg) | 930 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. |
| LLDPE | BPD3042 | 4.1
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised LLDPE for standard LV applications of for overhead cable application (Monosil®). |
| LLDPE | BPD3052 | 4.1
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised high performance LLDPE for LV applicaitons (Monosil® & Sioplas®) |
| LLDPE | BPD3220 | 2.4
(190°C/2.16 kg) | 920 | | | | | Power low voltage insulation
Unstabilised LLDPE for standard LV applications (Monosil®) |
| LLDPE | BPD3642 | 3
(190°C/2.16 kg) | 920 | | | | | Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications |
| LLDPE | BPD3669 | 3.3
(190°C/2.16 kg) | 926 | | | | | Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications. |
| LLDPE | LL0209AA | 0.9
(190°C/2.16 kg) | 920 | | | | | General purpose film |
| LLDPE | LL0209AE | 0.9
(190°C/2.16 kg) | 920 | | | | | General purpose film |
| LLDPE | LL0209KJ | 0.9
(190°C/2.16 kg) | 921 | | | | | General purpose film |
| LLDPE | LL0220AA | 2.4
(190°C/2.16 kg) | 920 | | | | | Cast handwrap; blending |
| LLDPE | LL0230AA | 3.0
(190°C/2.16 kg) | 920 | | | | | Cast stretchwrap |
| LLDPE | LL2209AF | 0.9
(190°C/2.16 kg) | 920 | | | | | Sealing layers; lamination |
| LLDPE | LL2640AC | 4.1
(190°C/2.16 kg) | 930 | | | | | Grade with great sealing properties and good puncture resistance used in paper coating and in the hygienic market. Used either in co-extrusion or in blends with LDPE. Cast stretchwrap; anticling layer; bubble film. |
| LLDPE | LL3910AA | 1
(190°C/2.16 kg) | 936 | | | | | LDPE resin suitable for use in lean and rich blend blown film applications, such as overwrap, counter bags, shrink film and boil-in-the-bag applications |
| LLDPE | LL6120AA | 2.3
(190°C/2.16 kg) | 920 | | | | | Cast stretch film, artificial grass |
| LLDPE | LL6130AA | 3.
(190°C/2.16 kg) | 920 | | | | | Cast stretchwrap |
| LLDPE | LL6208AF | 0.9
(190°C/2.16 kg) | 920 | | | | | For use in rich blends in heavy duty sacks, liners and other thin film applications; artificial grass. |
| LLDPE | LL6430AA | 3.2
(190°C/2.16 kg) | 926 | | | | | Cast stretchwrap; anticling layer |
| LLDPE | LL6608AF | 0.9
(190°C/2.16 kg) | 928 | | | | | Lean and rich blend blown film applications such as rigid layers in co-extrusion, carrier bags, refuse sacks and liners; artificial grass |
| LLDPE | LL6608LJ | 0.9
(190°C/2.16 kg) | 929 | | | | | Mailing film; carrier, bread and produce bags |
| LLDPE | LL6908AA | 0.9
(190°C/2.16 kg) | 936 | | | | | C6-LLDPE developed for highly demanding extrusion segments e.g. thick sheeting for geomembrane and geoliner applications |
| LLDPE | LL6910AA | 1.0
(190°C/2.16 kg) | 936 | | | | | For use in lean and rich blend blown film applications such as overwrap, counter bags, shrink film and boil-in-the-bag applications; artificial grass. |
| LLDPE | LL6910KJ | 1
(190°C/2.16 kg) | 937 | | | | | Overwrap; nappy bags; lamination |
| LLDPE | LL6930AA | 3.5
(190°C/2.16 kg) | 936 | | | | | Cast stretchwrap; anticling layer |
| LLDPE | LL8109AA | 0.9
(190°C/2.16 kg) | 918 | | | | | Mulch film; refuse sacks; liners; thin film applications |
| LLDPE | LL8109KJ | 0.9
(190°C/2.16 kg) | 922 | | | | | Mulch film; refuse sacks; liners; thin film applications |
| MDPE | BPD4020 | 0.2
(190°C/2.16 kg) | 938 | | | | | Jacketing
Stabilised MDPE jacket |
| MDPE | BPD4035 | 0.2
(190°C/2.16 kg) | 949 | | | | | Jacketing
MDPE black jacket compound |
| mLLDPE | PF1315AA | 15
(190°C/2.16 kg) | 914 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |
| mLLDPE | PF1320AA | 20
(190°C/2.16 kg) | 913 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |
| mLLDPE | PF6130AA | 3.5
(190°C/2.16 kg) | 918 | | | | | High performance cast stretch |
| mLLDPE | PF6212AA | 1.2
(190°C/2.16 kg) | 920 | | | | | Consumer packaging; heavy duty sacks; thin film applications |
| mLLDPE | PF6212KJ | 1.2
(190°C/2.16 kg) | 921 | | | | | Consumer packaging; thin film applications |
| mLLDPE | PF6212LA | 1.2
(190°C/2.16 kg) | 920 | | | | | High quality lamination film |
| mLLDPE | PF6212LJ | 1.2
(190°C/2.16 kg) | 921 | | | | | High quality lamination film |
| mLLDPE | PF6220AA | 2
(190°C/2.16 kg) | 920 | | | | | Consumer packaging; thin film applications |
| mLLDPE | PF6220KJ | 2
(190°C/2.16 kg) | 921 | | | | | Consumer packaging; thin film applications |
| mLLDPE | PF6612AA | 1.3
(190°C/2.16 kg) | 926 | | | | | Collation shrinkwrap; consumer packaging |
| mLLDPE | PF6612KJ | 1.3
(190°C/2.16 kg) | 926 | | | | | Collation shrinkwrap; consumer packaging |