| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| EBA | B24D230 | 0.35
(190°C/2.16 kg) | 924 | |  |  |  | Jacketing
EBA (8% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| EBA | B24D760 | 0.3
(190°C/2.16 kg) | 924 | | | | | EBA copolymer for elastic packaging film |
| EBA | B28N230 | 8
(190°C/2.16 kg) | 924 | | | | | Jacketing
EBA (15% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 19N430B | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE grade for general coating applications with improved heat sealability |
| LDPE | 19N930 | 7
(190°C/2.16 kg) | 920 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 21D430 | 0.25
(190°C/2.16 kg) | 923 | | | | | Heavy duty film; shrinkhoods |
| LDPE | 21F430 | 0.8
(190°C/2.16 kg) | 923 | | | | | General purpose film and bags |
| LDPE | 21F564 | 0.8
(190°C/2.16 kg) | 923 | | | | | General purpose; carrier bags |
| LDPE | 21H460 | 1.5
(190°C/2.16 kg) | 922 | | | | | General purpose; shrink; foam |
| LDPE | 22D730 | 0.3
(190°C/2.16 kg) | 922 | | | | | Blown film for extra strong bags and shrink film |
| LDPE | 22E740 | 0.5
(190°C/2.16 kg) | 922 | | | | | Blown film for extra strong bags and shrink film |
| LDPE | 22G564 | 1.2
(190°C/2.16 kg) | 922 | | | | | Blown film for carrier bags |
| LDPE | 22G764 | 1.2
(190°C/2.16 kg) | 922 | | | | | Blown film for strong bags and shrink film |
| LDPE | 22H594 | 2.1
(190°C/2.16 kg) | 922 | | | | | |
| LDPE | 22H760 | 2.1
(190°C/2.16 kg) | 922 | | | | | Blown film for packaging |
| LDPE | 23H430 | 2
(190°C/2.16 kg) | 923 | | | | | General purpose; shrink; foam |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| LDPE | 23L430B | 4.5
(190°C/2.16 kg) | 923 | | | | | LDPE grade for general coating applications |
| LDPE | 23T930 | 22
(190°C/2.16 kg) | 923 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 24F564 | 0.75
(190°C/2.16 kg) | 924 | | | | | Blown film for lamination |
| LDPE | 24F760 | 0.75
(190°C/2.16 kg) | 924 | | | | | Blown film for lamination |
| LDPE | 28H430 | 2.1
(190°C/2.16 kg) | 930.5 | | | | | Nappy film; hygienic; cast |
| LDPE | BP28D780 | 0.25
(190°C/2.16 kg) | 929 | | | | | Telecom insulation
LDPE insulation with high extrusion performance |
| LDPE | BPD2000 | 2
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2000E | 2
(190°C/2.16 kg) | 923 | | | | | Power medium & high voltage insulation and applications requesting extra cleanliness
Unstabilised very clean LDPE for peroxide crosslinking (direct peroxide injection) |
| LDPE | BPD2070 | 0.28
(190°C/2.16 kg) | 923 | | | | | Power medium voltage insulation
Unstabilised clean LDPE for silane crosslinking (Monosil®) |
| LDPE | BPD2142 | 1
(190°C/2.16 kg) | 930 | | | | | Power low voltage cable insulation
Unstabilised LDPE (Monosil®, Sioplas®) |
| LDPE | BPD2167 | 0.3
(190°C/2.16 kg) | 930 | | | | | Power low voltage insulation
Unstabilised LDPE for overhead cables application (Monosil®) |
| LDPE | BPD8063 | 1.5
(190°C/2.16 kg) | 923 | | | | | Telecom insulation
LDPE for low loss RF cable insulation |
| LDPE | BPD8128 | 0.27
(190°C/2.16 kg) | 923 | | | | | Power low voltage cable insulation
Stabilised LDPE for copper conductor (Monosil ®) |
| LDPE | M21E760 | 0.5
(190°C/2.16 kg) | 933 | | | | | Easy-tear applications |
| LDPE | M21G764 | 0.95
(190°C/2.16 kg) | 926 | | | | | FFS thin bags; blending |
| LDPE | M21G864 | 0.95
(190°C/2.16 kg) | 926 | | | | | Deep freeze, FFS thin bags |
| LDPE | M21N430 | 7.5
(190°C/2.16 kg) | 922 | | | | | Acid copolymer with 1.2 % MAA to achieve a better adhesion to various substrates, particularly aluminium foil or metallized BOPP |
| LDPE | M23N430 | 7.5
(190°C/2.16 kg) | 923 | | | | | Speciality extrusion coating resin with improved adhesion characteristics |
| LDPE | PH22D630 | 0.3
(190°C/2.16 kg) | 922 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications |
| LDPE | PH23H630 | 2
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH23T630 | 22
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH27D630 | 0.3
(190°C/2.16 kg) | 927 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH30D630 | 0.3
(190°C/2.16 kg) | 930 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. |
| MDPE | BPD4020 | 0.2
(190°C/2.16 kg) | 938 | | | | | Jacketing
Stabilised MDPE jacket |
| MDPE | BPD4035 | 0.2
(190°C/2.16 kg) | 949 | | | | | Jacketing
MDPE black jacket compound |