| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| HDPE | HD5130EA-B | 2.4
(190°C/2.16 kg) | 952 | |  |  | | HDPE grade for caps and closures with direct beverage contact for sparkling water and carbonated soft drinks; high ESCR, slip agent free |
| HDPE | HD5211EA-B | 11
(190°C/2.16 kg) | 951 | | | | | HDPE grade for caps and closures with direct beverage contact for still mineral water, aromatized water and juices ; easy processing, slip agent free |
| HDPE | HD5226EA-M | 26
(190°C/2.16 kg) | 953 | | | | | HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and Caps & Closures intended for the primary packaging of medical and pharmaceutical applications |
| HDPE | HD6070EA-B | 7.6
(190°C/2.16 kg) | 960 | | | | | HDPE grade for caps anc closures with direct beverage contact for still mineral water, aromatized water and juices; easy processing, slip agent free |
| HEAT SEAL | KS357 | 5
(230°C/2.16 kg) | | 620 | | | | BOPP Film 105°C SIT terpolymer for metallisable film |
| HPP | 100-MG03 | 3
(230°C/2.16 kg) | | 1450 | | | | PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications |
| HPP | 100-MG12 | 12
(230°C/2.16 kg) | | 1400 | | | | PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications |
| HPP | 100-MG25 | 25
(230°C/2.16 kg) | | 1200 | | | | PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications
|
| LDPE | PH22D630 | 0.3
(190°C/2.16 kg) | 922 | | | |  | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications |
| LDPE | PH23H630 | 2
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH23T630 | 22
(190°C/2.16 kg) | 923 | | | | | Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH27D630 | 0.3
(190°C/2.16 kg) | 927 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. |
| LDPE | PH30D630 | 0.3
(190°C/2.16 kg) | 930 | | | | | Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. |
| RCP | 200-MG02 | 1.8
(230°C/2.16 kg) | | 900 | | | | Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C |
| RCP | 200-MS25 | 25
(230°C/2.16 kg) | | 950 | | | | Highly clarified and highly lubricated random copolymer with a high ethylene content and good flow primarily intended for injection moulding |