| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| Compound | HEY500 | 25
(230°C/2.16 kg) | 910 | |  |  | | |
| HDPE | HD6070FA | 7.6
(190°C/2.16 kg) | 960 | | | |  | High density homopolymer with a very low gel level. Used in blends for food packaging to increase water vapour barrier properties, temperature, oil and fat resistance. When used in blends provides increased stiffness, higher gloss and reduced tendency to |
| HPP | 100-GA35 | 35
(230°C/2.16 kg) | | 1350 | | | | Injection moulding master-batches & compounds applications |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 19N430B | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE grade for general coating applications with improved heat sealability |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| LDPE | 23L430B | 4.5
(190°C/2.16 kg) | 923 | | | | | LDPE grade for general coating applications |
| LDPE | M21N430 | 7.5
(190°C/2.16 kg) | 922 | | | | | Acid copolymer with 1.2 % MAA to achieve a better adhesion to various substrates, particularly aluminium foil or metallized BOPP |
| LDPE | M23N430 | 7.5
(190°C/2.16 kg) | 923 | | | | | Speciality extrusion coating resin with improved adhesion characteristics |
| LLDPE | LL2640AC | 4.1
(190°C/2.16 kg) | 930 | | | | | Grade with great sealing properties and good puncture resistance used in paper coating and in the hygienic market. Used either in co-extrusion or in blends with LDPE. Cast stretchwrap; anticling layer; bubble film. |
| mLLDPE | PF1315AA | 15
(190°C/2.16 kg) | 914 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |
| mLLDPE | PF1320AA | 20
(190°C/2.16 kg) | 913 | | | | | C6 m-LLDPE for extrusion coating, injection moulding and compounding with a basic antioxidant additive package |