| Material | Grade | MFR
(g/10min) | Density
(kg/m³) | Flexural Modulus
(MPa) | Tech
Data
Sheet | MSDS
Regul.
Certif. | SSS | Typical Applications |
| HDPE | HD5050EA | 4
(190°C/2.16 kg) | 950 | |  |  |  | HDPE grade for caps & closures, crates, pails, houseware |
| HDPE | HD5130EA | 2.4
(190°C/2.16 kg) | 952 | | | | | HDPE grade for caps & closures, bins |
| HDPE | HD5211EA | 11
(190°C/2.16 kg) | 951 | | | | | Pails, houseware, cartridges, toys, caps & closures, over caps |
| HDPE | HD5218EA | 18
(190°C/2.16 kg) | 952 | | | | | Caps & Closures, Aerosol caps, pails, houseware |
| HDPE | HD5226EA | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD5226EA-E | 26
(190°C/2.16 kg) | 953 | | | | | Houseware, Caps & Closures, Over caps |
| HDPE | HD6070EA | 7.6
(190°C/2.16 kg) | 960 | | | | | Caps & Closures, Over caps, Cartridges, crates, pallets, pails |
| HPP | 100-CA50 | 50
(230°C/2.16 kg) | | 1550 | | | | Thin walled containers for dairy and fresh food, media packaging |
| HPP | 100-GA02 | 2
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes. |
| HPP | 100-GA04 | 4
(230°C/2.16 kg) | | 1400 | | | | Trays and containers for food products, tapes. Good rigidity, high heat resistance |
| HPP | 100-GA09 | 9
(230°C/2.16 kg) | | 1500 | | | | General purpose injection moulding, standard cast film |
| HPP | 100-GA12 | 12
(230°C/2.16 kg) | | 1400 | | | | Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. |
| HPP | 100-GB06 | 6
(230°C/2.16 kg) | | 1450 | | | | HPP for trays, containers. Good rigidity, high heat resistance |
| HPP | 100-GB25 | 25
(230°C/2.16 kg) | | 1200 | | | | Thin wall parts, garden furniture |
| HPP | 100-HR25 | 25
(230°C/2.16 kg) | | 1800 | | | | High stiffness for appliances, technical moulding and food packaging |
| HPP | 101-SA09 | 9
(230°C/2.16 kg) | | 1500 | | | | Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent |
| ICP | 400-CA70 | 70
(230°C/2.16 kg) | | 1150 | | | | ICP for yellow fat containers, housewares, thin wall packaging, Caps & closures |
| ICP | 401-CB50 | 50
(230°C/2.16 kg) | | 1300 | | | | ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares |
| ICP | 402-CB12 | 12
(230°C/2.16 kg) | | 1350 | | | | ICP for pails, containers, crates, housewares, toys |
| ICP | 451-HP40 | 40
(230°C/2.16 kg) | | 1350 | | | | ICP for housewares, pails, boxes |
| ICP | CAP906 | 6
(230°C/2.16 kg) | | 1500 | | | | ICP for caps and closures for the packaging of carbonated soft drinks |
| LDPE | 18R430 | 15
(190°C/2.16 kg) | 918 | | | | | LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding |
| LDPE | 19N430 | 7.5
(190°C/2.16 kg) | 920 | | | | | LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding |
| LDPE | 19N930 | 7
(190°C/2.16 kg) | 920 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| LDPE | 20P430 | 8.8
(190°C/2.16 kg) | 920.5 | | | | | LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding |
| LDPE | 23L430 | 4.1
(190°C/2.16 kg) | 924 | | | | | LDPE Grade for general coating applications, general purpose injection moulding |
| LDPE | 23T930 | 22
(190°C/2.16 kg) | 923 | | | | | LDPE for injection moulding of thin walled containers and caps & closures |
| RCP | 200-CA13 | 13
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent packaging, Caps & closures, housewares |
| RCP | 200-CA25 | 25
(230°C/2.16 kg) | | 1000 | | | | RCP for transparent thin wall packaging, housewares, clarified food containers - improved organoleptics |
| RCP | 200-CA40 | 40
(230°C/2.16 kg) | | 1100 | | | | RCP for transparent thin wall packaging, Caps & closures, housewares, clarified food containers - improved organoleptics |
| RCP | 240-CA12 | 13
(230°C/2.16 kg) | | 850 | | | | RCP for transparent packaging requiring excellent impact |